WelcomeCQ9电子为梦而年轻!

深圳市展业达鸿科技CQ9电子

联系展业达鸿公司:0755-22913855

当前位置: CQ9电子 > 公司产品 > > 影像模体 >

美国CIRS 062MQA超声波测试模体,CIRS 062MQA模体

美国CIRS 062MQA超声波测试模体,CIRS 062MQA模体

型号:CIRS 062MQA 类别: 影像模体 品牌:美国CIRS pdf资料:美国CIRS 062MQA超声波测试模体,CIRS 062MQA模体.pdf

销售热线:0755-22934005  0755-22913855 在线咨询产品:
美国CIRS 062MQA超声波测试模体,CIRS 062MQA模体简介

The design intent of  062MQA is to provide a tool that can be used for both electron density calibration and image quality assessment of Cone Beam CT systems integrated in radiation therapy devices. The electron calibration function of the phantom enhances the outcome of the adaptive radiation therapy while the image quality features address the fine balance between optimizing image quality while minimizing radiation dose. www.slcaye.com 

The 062MQA CBCT Electron Density & Image Quality Phantom consists of several sections: a 100mm thick body slab, a 100 mm thick CBCT Image Quality phantom, a 50mm thick Electron Density Phantom, and a Bolus consisting of a 37.5mm thick uniform slab, a 12.5mm thick uniform slab and a 50mm thick uniform slab. www.slcaye.com 

The 100 mm thick body section has a central hole that receives the CBCT Image Quality Phantom. Each Bolus slab is drilled to accommodate an ion chamber insert and allow for ion chamber measurements regardless of the position of the Image Quality Insert. The thicknesses of the sections were selected to allow for positioning of any of the layers containing the Image Quality features in the central axis of the beam. Also sections of different thickness decrease the increment with which the electron density section can be offset from the central axis.

Email:hongqi@slcaye.com

The phantom support along with laser alignment marks allow for easy and quick positioning of the phantom on the accelerator couch. The phantom is placed on the support rails with the help of machined grooves.  Buffer plates are provided to decrease the artifacts from the support device and to allow the user to access the handles on the support plates. The leveling of the support and implicitly the phantom is done by adjusting leveling feet.

Tel:0755-22913855

美国CIRS 062MQA超声波测试模体,CIRS 062MQA模体


美国CIRS 062MQA超声波测试模体,CIRS 062MQA模体 www.slcaye.com 

美国CIRS 062MQA超声波测试模体,CIRS 062MQA模体

美国CIRS 062MQA特点:

Email:hongqi@slcaye.com

  • Perform all CT Image QA tests for AAPM TG Report #1

    Email:hongqi@slcaye.com

  • Use ionization chambers for dose measurements

    深圳市福田区八卦岭工业区615栋419

  • Perform dose measurements using Ion chamber 深圳市福田区八卦岭工业区615栋419

  • Calibrate Electron Density in multi-slice CT and Cone Beam CT

    www.slcaye.com 

  • Perform central axis and off-set measurements

    深圳市展业达鸿科技CQ9电子

  • Position simulated tissue materials in CT & CBCT energy range at 17 different locations 深圳市福田区八卦岭工业区615栋419

  • Optimized for volumetric imaging

    Email:hongqi@slcaye.com

  • Quick positioning and customized loading configurations www.slcaye.com 

 

The One Tool Solution for Electron Density Calibration & Image Quality Assessment 深圳市福田区八卦岭工业区615栋419

 

CBCT Image Quality Phantom

www.slcaye.com 

The Phantom is comprised of four layers: spatial resolution, CT number linearity/slice thickness, low contrast and uniformity. The positioning of the different layers of the CBCT Image Quality phantom at the central axis can be done with the phantom in the 100mm body section or with the phantom placed directly on the support device.  深圳市福田区八卦岭工业区615栋419

  Tel:0755-22913855

 

Spatial Resolution Layer

深圳市福田区八卦岭工业区615栋419

The Spatial Resolution Layer is designed to evaluate the spatial resolution of IGRT systems. Line pair patterns from 1 lp/cm to 16 lp/cm are embedded in the background. In order to minimize artifacts, each line pair pattern is made from a material with 350HU greater than the background attenuation. The line pair patterns are 3D patterns 12mm in height along the longitudinal axis of the CBCT Image Quality Phantom. The spatial resolution targets are arranged in a circular pattern.

深圳市展业达鸿科技CQ9电子

 

深圳市福田区八卦岭工业区615栋419

  Tel:0755-22913855

CT Number Linearity and Slice Thickness Layer Tel:0755-22913855

The CT number Linearity and Slice Thickness Layer is designed to determine Contrast-to-noise Ratio, Hounsfield number accuracy and Slice Thickness Sensitivity. Six rods made of Air, Low Density Polyethylene (LDPE), Polystyrene, Acrylic, Delrin and Teflon are used to measure the CnR and Hounsfield number Accuracy. Three angled air channels arranged in an equilateral triangle can be used to assess Slice thickness sensitivity.

Email:15920060912@139.com

  深圳市福田区八卦岭工业区615栋419

Low Contrast Layer

Tel:86-755-22934005

The Low Contrast Layer is intended to assess the system's ability to detect small differences in contrast. It contains three sets of low contrast rods with linear attenuation differences of 0.5%, 1% and 2% relative to the background material. The diameters of the low contrast rods were chose to provide a 0.5 ratio between two adjacent rods by cross section and volume. Additional features are designed to evaluate the magnification on the orthogonal axes of the transversal image and as input for calculation of the Point Spread Function and subsequent calculation of Modulation Transfer Function.

Tel:0755-22913855

  深圳市福田区八卦岭工业区615栋419

Uniformity Layer Email:hongqi@slcaye.com

The Uniformity Layer is designed to measure the system’s ability to produce uniform images across the field of view of an object with highly homogeneous physical properties in all directions. 深圳市福田区八卦岭工业区615栋419


Electron Density Phantom Email:hongqi@slcaye.com

The Phantom consists of nested disks made from Plastic Water®. The nested disks allow simulation of both head and abdomen phantom configurations. Eight different tissue equivalent inserts can be positioned at 17 different locations within the scan field. The geometry of the phantom also enables the user to take measurement offset from the central axis.

Tel:0755-22934009      

 

Tel:0755-22934009      

NOTE: This product or an optional accessory of this product requires a CIRS dosimetry cavity code before an order can be placed. Please refer to the Dosimetry Cavity Codes document to identify the CIRS code for the probe you intend to use with this product. Tel:0755-22934009      

  深圳市福田区八卦岭工业区615栋419

公司产品

公司地址:深圳市福田区八卦岭工业区615栋419 邮箱:15920060912@139.com   网站地图
电话:0755-22934005 0755-22913855 传真:0755-22934009 24小时客服电话:15920060912
深圳市展业达鸿科技CQ9电子核心业务是满足对质量、货期和售后服务要求严格的行业用户,为客户提供测试设备及相关器材的供应服务。
创业至今,与国内外著名仪器、仪表生产厂商进行稳固而广泛的技术与销售合作,真正帮助企业"提高采购效率,降低采购成本"。
Copyright© 2016-2017 深圳市展业达鸿科技CQ9电子 粤ICP备12058408号     

在线客服
销售电话

深圳总公司:

0755-22934005

0755-22934009

0755-22913855



24小时支持电话:

15920060912